• Natural Wood Cleaner voor het reinigen en ontvetten van houten meubels
1 1

Furnitureupholstery.nl

Natural Wood Cleaner for Cleaning and Degreasing Wooden Furniture

Natural Wood Cleaner for Cleaning and Degreasing Wooden Furniture

โ‚ฌ5,50 EUR
โ‚ฌ5,50 EUR
Aanbieding Uitverkocht
Belastingen inbegrepen.
Natural Wood Cleaner is an effective water-based wood cleaner for thoroughly cleaning and degreasing wooden furniture and other wooden surfaces. The product removes dirt, grease, and stains and is suitable for virtually all wood species and finishes, including untreated, lacquered, oiled, and waxed wood.

The powerful yet user-friendly formula loosens accumulated dirt and dries quickly. Natural Wood Cleaner can be used as a regular cleaner, but it is especially suited as a pre-treatment before applying specialized maintenance products such as furniture oil, wax, or polish.

By cleaning the entire furniture piece evenly first, old dirt is removed, allowing the subsequent care product to be absorbed better and more uniformly. This contributes to a smoother and more even final result.

Natural Wood Cleaner is also the replacement product for Ecotone Cleaner. If you previously used Ecotone Cleaner to clean wooden furniture, Natural Wood Cleaner is the recommended replacement.

Meijer & Visser Upholstery recommends Natural Wood Cleaner for cleaning and preparing wooden furniture components before applying suitable wax, oil, or polish.

Are the upholstery, padding, or fabric of your furniture worn down in addition to the wooden frame? Check out the options for having furniture re-upholstered by Meijer & Visser Upholstery.

Benefits of Natural Wood Cleaner

  • Powerful water-based wood cleaner

  • Cleans and degreases wooden surfaces

  • Removes dirt and light stains

  • Strong grease- and dirt-dissolving capability

  • Fast-drying formula

  • Suitable for all wood species

  • Suitable for untreated wood

  • Suitable for matte, semi-gloss, and high-gloss lacquered wood

  • Suitable for oiled and waxed wood

  • Suitable for tropical hardwood

  • Ideal pre-treatment before oil, wax, or polish application

  • Can partially remove old wax and oil layers

  • Direct replacement for Ecotone Cleaner

  • Recommended by Meijer & Visser Upholstery

Product Specifications

  • Product: Natural Wood Cleaner

  • EAN code: 8716834005662

  • Product number: 119155

  • Product type: Water-based wood cleaner

  • Furniture care category: Cleaning and degreasing

  • Suitable for: Untreated, lacquered, oiled, and waxed wood

  • Wood finishes: Wax, hardwax oil, oil, matte lacquer, semi-gloss lacquer, and high-gloss lacquer

  • Suitable wood species: All wood species, including tropical hardwood

  • Properties: Grease-dissolving, dirt-dissolving, and fast-drying

  • Replaces: Ecotone Cleaner

  • Safety warning: Causes skin irritation and serious eye irritation

Which wood species is Natural Wood Cleaner suitable for?

Natural Wood Cleaner can be applied to virtually all common wood species and furniture finishes. The product is suitable for untreated wood as well as wood finished with oil, wax, or lacquer.

  • Oak

  • Teak

  • Beech

  • Walnut

  • Pine

  • Mahogany

  • Cherry

  • Tropical hardwood

  • Untreated wood

  • Oiled wood

  • Waxed wood

  • Wood treated with hardwax oil

  • Matte lacquered wood

  • Semi-gloss lacquered wood

  • High-gloss lacquered wood

Although the product is broadly applicable, wood types and finishes can react differently. Always test Natural Wood Cleaner on a small, inconspicuous area first.

Powerful Water-Based Wood Cleaner

Natural Wood Cleaner is formulated on a water base to break down grease, dirt, and everyday contamination. The cleaner can be used on tables, cabinets, chairs, wooden armrests, sideboards, and other wooden furniture components.

Thanks to its strong dirt- and grease-dissolving capability, the product is particularly suited for surfaces that have become greasy, dull, or soiled through daily use.

Cleans and Degreases Wooden Furniture

Wooden furniture comes into daily contact with body oils, dust, food residues, and other dirt. Dining tops, armrests, handles, and chair legs especially tend to accumulate greasy or dark patches.

Natural Wood Cleaner loosens this dirt so it can be wiped away with a clean cloth. The surface is left clean, providing a superior base for subsequent maintenance treatments.

Suitable as a Pre-Treatment

One of the primary applications of Natural Wood Cleaner is preparing wood for maintenance products. Accumulated grime can prevent wax, oil, or polish from adhering evenly or penetrating the wood properly.

Thoroughly cleaning the entire piece beforehand ensures a cleaner, more uniform surface. This allows the new maintenance layer to spread more evenly, leading to a much finer finish.

Removing Stains from Waxed or Oiled Wood

Natural Wood Cleaner can be used to lift stains from furniture finished with wax or oil. For stubborn grime, the product can be carefully combined with extra-fine steel wool or a suitable fine abrasive pad.

This intensified method should only be applied when the wood species and finish permit it. Always work in the direction of the wood grain and test the technique on a hidden spot first.

Do not use coarse steel wool or harsh scouring pads, as these will cause scratches, gloss discrepancies, and permanent surface damage.

Instructions for Use: Natural Wood Cleaner

  1. Remove loose dust and surface dirt with a soft, dry cloth.

  2. Verify the specific wood species and existing finish.

  3. Test Natural Wood Cleaner on an inconspicuous area first.

  4. Apply a small amount of cleaner onto a clean cloth.

  5. Distribute the product evenly across the surface.

  6. Allow the cleaner to dwell briefly.

  7. Do not let the product dry out completely before wiping away the dirt.

  8. Wipe away the dissolved dirt using a clean cloth.

  9. Rotate frequently to a clean section of the cloth.

  10. Repeat the process for heavy or set-in grime if necessary.

  11. Allow the surface to dry completely.

  12. Treat the wood afterward with a suitable wax, oil, or polish.

Apply Natural Wood Cleaner to a Cloth First

Dispense the cleaner onto a clean cloth rather than pouring or spraying directly onto the wood. This enables better control over application volume and ensures even coverage.

Do not use a soaking wet cloth, and avoid leaving excess moisture on joints, seams, or untreated areas for extended periods.

Brief Dwell Time

Allow Natural Wood Cleaner to work briefly on the surface so grease and dirt can dissolve. The exact dwell time depends on the degree of soiling and the wood finish.

Do not leave the cleaner on the surface longer than necessary. Wipe away the loosened grime promptly with a clean cloth.

Removing Dissolved Dirt

Use a separate clean cloth to lift the dissolved dirt. Fold the cloth regularly to avoid rubbing loosened grime back into the wood grain.

For heavily soiled surfaces, multiple clean cloths may be required. Evaluate the preliminary result before repeating the process.

Multiple Treatments for Heavy Accumulation

Extremely old, greasy, or heavily soiled wax and oil layers may require multiple applications. Work calmly and evenly; do not attempt to remove all buildup in a single heavy application.

Multiple light cleaning passes offer greater control and minimize the risk of damaging or stripping the surface unevenly.

Partially Removes Wax or Oil Layers

Due to its intensive cleaning action, the product removes a portion of the existing wax or oil layer alongside the dirt. This is normal and explains why the wood may appear duller, drier, or lighter after cleaning.

The cleaned surface must therefore always be re-nourished and protected with a maintenance product suited to its original finish.

Always Treat After Cleaning

After using Natural Wood Cleaner, the surface must be treated with an appropriate furniture wax, wood oil, or polish. The correct choice depends on the existing finish:

  • Use furniture wax on wood originally finished in wax.

  • Use maintenance oil on oiled wood.

  • Use a suitable polish on lacquered surfaces.

  • Use hardwax oil if the furniture was originally treated with hardwax oil.

Allow the wood to dry completely before applying post-treatment products, and always follow the instructions on the selected care product.

Natural Wood Cleaner for Dining Tables

Dining tables frequently accumulate grease, fingerprints, food spills, and rings. Remove loose dirt first and test the cleaner on the underside of the tabletop.

Next, treat the entire tabletop rather than just an isolated spot. This prevents color or gloss variations. Allow the table to dry and follow with the appropriate oil, wax, or polish.

Natural Wood Cleaner for Wooden Chairs

Wooden chairs gather soil primarily on backrests, armrests, seat edges, and legs. Apply the cleaner with a cloth, giving extra attention to high-contact areas.

Prevent cleaner from soaking into upholstery, joints, or seams. Wipe away any excess liquid immediately.

Natural Wood Cleaner for Cabinets and Sideboards

Cabinets and sideboards can become dull from dust, cooking grease, and fingerprints. Test an inconspicuous area first, then clean complete doors, side panels, or top surfaces for an even result.

When dealing with veneers or antique furniture, exercise extra care regarding moisture levels. Use a lightly dampened cloth and prevent edges and seams from remaining wet.

Usage on Untreated Wood

Untreated wood lacks a protective layer and absorbs liquid quickly. Use minimal product and apply uniformly across the entire surface.

The wood may temporarily darken during treatment. Evaluate the final appearance only after the wood has dried completely.

Usage on Lacquered Wood

Natural Wood Cleaner can be used on matte, semi-gloss, and high-gloss lacquered wood. However, lacquer coats can become sensitive due to age, wear, or damage.

Always test beforehand and never use steel wool or scouring pads on lacquered surfaces, as they will scratch or dull the lacquer permanently.

Usage on Oiled Wood

On oiled wood, the cleaner removes dirt as well as a portion of the protective oil layer. As a result, the surface may feel dry or stripped after cleaning.

Allow the wood to dry completely, then re-treat it with an appropriate wood oil to restore its finish and protection.

Usage on Waxed Wood

Natural Wood Cleaner effectively breaks down old, soiled wax layers. Heavy buildup may require multiple treatments.

After cleaning, apply a new thin layer of furniture wax to refresh color and re-establish surface defense.

Usage on Tropical Hardwood

Tropical hardwoods like teak contain natural oils. Natural Wood Cleaner helps remove surface grime and grease, serving as ideal preparation before applying maintenance oil.

Always perform a test spot, as grain density, color, and finish vary across tropical wood pieces.

Fast-Drying Wood Cleaner

Natural Wood Cleaner features a fast-drying formulation, making it highly practical when maintenance re-application needs to follow promptly.

Fast-drying does not mean oil, wax, or polish can be applied instantly. Always confirm that the surface is thoroughly dry before proceeding with post-treatment.

Replacement for Ecotone Cleaner

Natural Wood Cleaner directly replaces Ecotone Cleaner. Users who previously relied on Ecotone Cleaner for cleaning and degreasing wooden surfaces can seamlessly transition to Natural Wood Cleaner.

Always review the product instructions and perform a test spot when switching, even if the previous cleaner was used on the same furniture piece.

Common Errors When Cleaning Wood

  • Applying the product without performing a preliminary test spot

  • Using excessive amounts of cleaner on the surface

  • Allowing the cleaner to dry completely with the loosened dirt on the wood

  • Continuing to wipe with a dirty cloth

  • Cleaning only a small isolated spot aggressively

  • Using coarse steel wool or harsh scouring pads

  • Scrubbing against the direction of the wood grain

  • Using steel wool on lacquered finishes

  • Applying post-treatment products before the wood has dried completely

  • Failing to re-apply wax, oil, or polish after cleaning

  • Mixing different care products without checking compatibility

Why does Meijer & Visser Upholstery recommend this product?

When restoring and maintaining furniture, starting with a clean base is critical. Dirt, body oils, and old maintenance residues prevent new wax or oil coats from absorbing evenly.

We recommend Natural Wood Cleaner because it cleans diverse wood species and finishes effectively, establishing an optimal foundation for subsequent care treatments.

A cleaner cannot repair deep scratches, wood discoloration, peeling veneer, or damaged lacquer. For structural issues, professional furniture restoration may be required.

Safety Information

Warning: Natural Wood Cleaner causes skin irritation and serious eye irritation. Always read the label before use and follow safety instructions on the packaging.

  • Causes skin irritation.

  • Causes serious eye irritation.

  • Avoid contact with skin and eyes.

  • Wear appropriate protective gloves.

  • Wash hands thoroughly after handling.

  • IF ON SKIN: Wash with plenty of water.

  • IF IN EYES: Rinse cautiously with water for several minutes.

  • Remove contact lenses if present and easy to do.

  • Continue rinsing eyes.

  • If eye irritation persists: Get medical advice/attention.

  • Keep out of reach of children.

  • Store in the original, tightly closed container.

Important Points of Attention

  • Always test Natural Wood Cleaner on an inconspicuous area first.

  • Confirm the wood species and existing finish before application.

  • Apply product using a clean cloth.

  • Allow the cleaner to dwell for a brief period only.

  • Wipe away loosened dirt with a separate clean cloth.

  • Continuously rotate to a clean section of the cloth.

  • Repeat treatment for heavy buildup if necessary.

  • Use extra-fine steel wool only on compatible wax or oil finishes.

  • Never use steel wool on lacquered surfaces.

  • Always work parallel to the wood grain.

  • Allow the surface to dry completely before post-treatment.

  • Always follow up with an application of wax, oil, or polish.

  • Avoid skin and eye contact.

  • Wear protective gloves.

  • Always adhere to instructions on the product packaging.

Tip from Meijer & Visser Upholstery

Clean an entire tabletop, cabinet door, armrest, or structural panel rather than an isolated spot. Cleaning small patches can result in visible sheen or color differences.

Prepare clean cloths and your chosen post-treatment product beforehand. Once the wood dries, you can immediately proceed with nourishing and protecting the surface.

Frequently Asked Questions about Natural Wood Cleaner

  • What is Natural Wood Cleaner used for? Natural Wood Cleaner is used for cleaning, degreasing, and removing dirt and stains from wooden furniture and surfaces.

  • Is Natural Wood Cleaner suitable for all wood species? Yes, it is suitable for virtually all wood species, including untreated wood, tropical hardwood, and lacquered, oiled, or waxed wood. Always test first.

  • Can Natural Wood Cleaner be used on lacquered wood? Yes, it can be used on matte, semi-gloss, and high-gloss lacquered wood. Do not use steel wool or abrasive pads on lacquer.

  • Can the product be used on oiled wood? Yes, but intensive cleaning may strip part of the oil layer. Re-apply an appropriate wood oil after the surface dries.

  • Is Natural Wood Cleaner suitable for waxed wood? Yes, the product breaks down dirt and old wax layers. Re-apply furniture wax after cleaning.

  • Does Natural Wood Cleaner remove grease? Yes, the formula has strong grease- and dirt-dissolving properties, making it ideal for degreasing wood surfaces.

  • Can Natural Wood Cleaner remove stains? It removes various surface stains and buildup. Set-in stains may require multiple treatments.

  • How is Natural Wood Cleaner applied? Apply the cleaner with a cloth, let it dwell briefly, and wipe away the loosened dirt with a clean cloth.

  • Can I use steel wool with this cleaner? Extra-fine steel wool can be used carefully on compatible oiled or waxed surfaces. Never use steel wool on lacquered wood, and always test first.

  • Does the wood need post-treatment after cleaning? Yes, because cleaning removes part of the existing wax or oil layer, re-applying wax, oil, or polish after drying is necessary.

  • Is Natural Wood Cleaner the replacement for Ecotone Cleaner? Yes, Natural Wood Cleaner directly replaces Ecotone Cleaner.

  • What safety warnings apply to Natural Wood Cleaner? Natural Wood Cleaner causes skin irritation and serious eye irritation. Avoid skin/eye contact and follow packaging safety guidelines.

Ordering Natural Wood Cleaner

Order Natural Wood Cleaner for thorough cleaning and degreasing of wooden furniture. The powerful water-based formula removes dirt, grease, and stains and is suitable for untreated, lacquered, oiled, and waxed wood.

Use Natural Wood Cleaner to prepare surfaces for maintenance treatments with wood oil, furniture wax, or polish. Recommended by Meijer & Visser Upholstery for establishing a clean, uniform base when maintaining wooden furniture components.
Alle details bekijken

Meubelstoffeerderij

U hoeft niet naar ons toe te komen โ€” wij komen vrijblijvend bij u thuis met een ruime keuze aan stof- en lederstalen. Zo kunt u in uw eigen omgeving rustig de perfecte materialen voor uw meubel kiezen.

VOOR
NA

VOOR & NA

Meubelstoffeerderij Meijer & Visser

Deze gispen fauteuil kwam bij ons binnen met een slechte vulling en versleten stof. De klant koos voor Kvadrat Hallingdal 65 als nieuwe stof en nieuwe lederen zwarte biezen.

Bekijk meer projecten