1 1

Furnitureupholstery.nl

Leather Protector for Nubuck, Suede, and Sanded Leather

Leather Protector for Nubuck, Suede, and Sanded Leather

€14,94 EUR
€14,94 EUR
Sale Sold out
Taxes included.
Leather Protector is a powerful leather protector for sanded and naturally finished leather types. The product helps guard nubuck, suede, pilot leather, full-aniline leather, and microleather against accidents and stains caused by water, oil, and grease.

The protective treatment makes suitable leather invisibly stain-resistant and water-repellent without noticeably altering the appearance or feel of the material. As a result, the leather retains its natural, soft, and luxurious look.

Leather Protector is suitable for leather furniture and home accessories, but it can also be used on compatible clothing, footwear, bags, and upholstery in cars, boats, and caravans. Use the product exclusively on new, clean, or freshly cleaned material.

Meijer & Visser Upholstery recommends Leather Protector for the regular impregnation of nubuck, suede, pilot leather, and suitable microleather. A proper protective coating helps prevent moisture and greasy contamination from penetrating deeply into the open structure of the material.

Is the leather already severely discolored, bare, torn, or permanently damaged? Check out the options for having leather furniture re-upholstered by Meijer & Visser Upholstery.

Benefits of Leather Protector

  • Protects against water, oil, and grease

  • Helps prevent stains and dirt accumulation

  • Renders compatible leather water-repellent

  • Invisible protective treatment

  • Does not alter the appearance of the leather

  • Does not affect the texture or feel of the material

  • Suitable for nubuck and suede

  • Suitable for pilot leather and full-aniline leather

  • Suitable for microleather with a microfiber top layer

  • Suitable for furniture, apparel, and accessories

  • Suitable for automotive, marine, and caravan upholstery

  • Easy application via aerosol spray can

  • Reaches maximum protection after approximately 6 to 12 hours

  • Recommended by Meijer & Visser Upholstery

Product Specifications

  • Product: Leather Protector

  • EAN code: 8716834005570

  • Product number: 142210

  • Leather type: Sanded and naturally finished leather

  • Application: Protection and conditioning

  • Suitable materials: Nubuck, suede, pilot leather, full-aniline leather, and microleather

  • Drying time: Approximately 60 minutes

  • Maximum protection level: Reached after approximately 6 to 12 hours

  • Usage rate: Approximately 50 ml per m²

  • Coverage per can: Approximately 8 to 10 m²

  • Spraying distance: Approximately 25 centimeters

Which leather types is Leather Protector suitable for?

Leather Protector is formulated for leathers featuring a natural, open, or sanded structure. Because these materials generally lack a fully sealed protective topcoat, they absorb moisture, oil, grease, and dirt more rapidly.

  • Nubuck

  • Suede

  • Pull-up / pilot leather

  • Full-aniline leather

  • Sanded furniture leather

  • Brushed leather

  • Leather with a velvety nap

  • Microleather with a microfiber top layer

  • Suitable natural leather upholstery

Always verify the material type and manufacturer care guidelines before use. Test the product first on a small, inconspicuous area to evaluate colorfastness and surface stability.

Protection for Nubuck and Suede

Nubuck and suede feature a soft, open fiber structure. Consequently, liquids and greasy contamination can quickly soak into the surface and leave permanent stains.

Leather Protector creates an invisible barrier around individual fibers. This hinders water, oil, and grease from penetrating the leather, allowing spilled liquids to be blotted away much more easily.

Suitable for Full-Aniline and Pilot Leather

Full-aniline leather and pilot leather showcase a highly natural aesthetic with little to no surface pigmentation. While this gives the material exceptional character, it also leaves it vulnerable to stains.

Leather Protector guards the surface without noticeably affecting its rich look or supple touch. Performing a preliminary test spot remains essential, as natural hides can react differently depending on their processing and finish.

Leather Protector for Microleather

The product is also suited for microleather—a composite material combining genuine leather with a microfiber top layer.

Due to its open structure, the microfiber layer can absorb moisture, grease, and dirt easily. Leather Protector helps make this surface layer water-repellent and stain-resistant without altering its characteristic soft feel.

Invisible Protection

A key advantage of Leather Protector is that the treatment remains virtually invisible when applied correctly. The material retains its original color, matte sheen, and natural surface structure.

Avoid over-saturation. Applying a layer that is too heavy can leave a white residue upon drying or temporarily alter the feel of the nap.

Water-Repellent and Stain-Resistant

Leather Protector makes compatible leather water-repellent and stain-resistant. Following proper application, water droplets remain on top of the surface, forming visible beads.

The product does not make the leather completely waterproof. Therefore, spilled liquids should still be blotted up gently as soon as possible with a clean, absorbent cloth.

Household Applications

Leather Protector can be applied to various leather furniture pieces and interior accessories, provided the material is suitable and colorfast.

  • Nubuck sofas

  • Suede armchairs

  • Leather dining chairs

  • Sanded leather headrests

  • Poufs and ottomans

  • Leather lampshades

  • Other compatible leather home decor items

Usage on Apparel and Accessories

Beyond furniture, Leather Protector can be used on various garments and accessories made of compatible leather or microleather.

  • Sportswear

  • Rainwear

  • Nubuck footwear

  • Suede shoes and boots

  • Leather bags

  • Backpacks

  • Suitable leather gloves

Always test the product on a hidden area when treating garments or accessories. Different dyes, adhesive backings, and finishes can react uniquely to impregnating sprays.

Protecting Automotive, Marine, and Caravan Upholstery

Leather Protector is equally suitable for specialized upholstery in cars, boats, and caravans. Light colors and open leather types especially benefit from extra defense against moisture, grease, and daily wear.

Always confirm that the material is genuine sanded leather, full-aniline leather, or compatible microleather. Do not apply the product without testing, and avoid treating steering wheels, controls, or surfaces that must remain non-slip.

Apply Only to Clean Leather

Use Leather Protector exclusively on brand-new leather or leather that has been recently and thoroughly cleaned. Applying the spray over dirt, grease, or existing stains will trap the contamination underneath the protective coating.

Remove loose dust beforehand using a soft brush or a vacuum attachment with soft bristles. Treat any existing spots first with a cleaner formulated specifically for the leather type.

Instructions for Use: Leather Protector

  1. Ensure the surface is clean, dust-free, and completely dry.

  2. Confirm that the leather or microleather is suitable for impregnation.

  3. Test Leather Protector on an inconspicuous area first.

  4. Allow the test area to dry completely and inspect color and texture.

  5. Do not proceed if color transfers during testing.

  6. Shake the aerosol spray can for approximately 15 to 20 seconds.

  7. Hold the can upright during application.

  8. Maintain a distance of roughly 25 centimeters from the surface.

  9. Spray the product using smooth, even overlapping passes.

  10. Keep the can moving steadily while spraying.

  11. Avoid over-saturating specific spots or applying a heavy, wet coat.

  12. Allow the treated surface to dry for approximately 60 minutes.

  13. Test the protection using a few drops of water.

  14. Repeat the application if the water absorbs within five seconds.

  15. Allow the material to fully cure afterward.

Shake Can for 15 to 20 Seconds

Shake the aerosol spray can thoroughly for 15 to 20 seconds before use. This mixes the active ingredients evenly to ensure a uniform mist distribution.

If spraying over an extended period, shake the can briefly again every few minutes to maintain proper consistency.

Spray from a Distance of 25 Centimeters

Hold the aerosol can about 25 centimeters away from the material. At this distance, the mist spreads sufficiently to coat the surface evenly.

Holding the can too close can result in wet spots, dripping, and localized color variation. Applying multiple thin passes is always better than applying one heavy layer.

Drying Time of Approximately 60 Minutes

The average drying time is approximately 60 minutes. Actual drying duration depends on room temperature, humidity, ventilation, and the volume of spray applied.

Do not sit on or handle the treated item during the initial drying phase. Avoid placing cushions, throws, or other objects on the surface until dry.

Maximum Protection After 6 to 12 Hours

While the surface may feel dry to the touch after roughly 60 minutes, the maximum level of protective curing is reached after 6 to 12 hours.

Minimize contact with the material during this curing window and protect it from moisture, oil, and dirt.

The Water Droplet Test

After the initial drying phase, check whether the protective coating has been sufficiently established. Place a few small droplets of clean water on an inconspicuous section of the surface.

The water should bead up clearly and stay on top of the surface. If the water absorbs within five seconds, the protection is incomplete, and a second thin coat should be applied.

Gently blot away test droplets immediately with a clean, absorbent cloth. Do not rub the surface.

What to Do in Case of a White Haze

If a white film or powder remains after drying, too much product was applied to that area. Gently brush the dry surface with a soft brush to remove the residue.

When treating subsequent sections, apply less product and maintain proper distance. Extreme over-saturation can temporarily alter the surface texture and nap.

Coverage and Consumption

The average application rate is approximately 50 ml per square meter. A single aerosol spray can provides coverage for roughly 8 to 10 m².

Actual coverage depends on the open structure, texture, and absorbency of the material. Highly absorbent leathers may draw in more product, but over-saturation must still be avoided.

Clean Deep Stains First

Leather Protector is an impregnating barrier, not a stain remover. Deep or pre-existing stains must be cleaned before applying the spray.

For suitable smooth leathers, Natural Leather Cleaner or Leather Power Cleaner can be used. Always double-check whether the cleaner matches the specific leather type. Leather Power Cleaner is not suitable for nubuck, suede, or other sanded leathers.

For stains on nubuck or suede, use only cleaning products specifically formulated for sanded leathers.

Re-Apply Regularly

The protective barrier gradually wears away over time due to friction, daily use, and routine cleaning. Therefore, re-apply Leather Protector periodically.

Re-application is especially important after deep cleaning, as the cleaning process removes part of the protective layer.

Protecting a Nubuck Sofa

Thoroughly vacuum the sofa first using a soft brush attachment. Gently brush the nap up and remove any visible spots with a suitable nubuck cleaner.

Allow the sofa to dry completely. Next, spray Leather Protector in even, sweeping motions from a distance of 25 centimeters over each seat cushion, backrest, and armrest.

Allow the sofa to dry for at least 60 minutes, and ideally let it cure for 6 to 12 hours before resuming heavy use.

Protect New Furniture Immediately

New sanded leather is best treated with Leather Protector immediately upon delivery. Because the surface is clean and free from everyday grime, the impregnation adheres evenly.

Always perform a test spot on new furniture as well. Being brand new does not guarantee that every dye or finish is fully colorfast or compatible with spray treatments.

Why does Meijer & Visser Upholstery recommend Leather Protector?

At Meijer & Visser Upholstery, we work daily with diverse natural and sanded leather types. Nubuck, suede, and pilot leather are particularly prone to absorbing liquid spills and oil.

We recommend Leather Protector because it forms a virtually invisible protective layer without noticeably changing the natural look and soft touch of compatible leather.

Regular protection helps prolong the lifespan of the material, though it cannot repair pre-existing tears, worn spots, deep stains, or permanent color loss.

Important Points of Attention

  • Use Leather Protector only on brand-new or freshly cleaned material.

  • Ensure the surface is completely dry and dust-free.

  • Always test the spray on an inconspicuous area first.

  • Do not treat the material if color transfers during testing.

  • Shake the aerosol can for 15 to 20 seconds before use.

  • Hold the can upright during application.

  • Spray from a distance of approximately 25 centimeters.

  • Work in calm, even, overlapping passes.

  • Avoid extreme over-saturation.

  • Allow the surface to dry for approximately 60 minutes.

  • Full protective curing is reached after 6 to 12 hours.

  • Verify protection using the water droplet test.

  • Re-apply if water absorbs into the leather within five seconds.

  • Gently brush off any white haze caused by over-application.

  • Clean deep stains prior to applying the protector spray.

  • Re-apply the spray after intensive cleaning sessions.

  • Always follow safety and application guidelines on the packaging.

Tip from Meijer & Visser Upholstery

Visually divide large surfaces into sections and treat each section using identical speed and spraying distance. This creates a uniform protective barrier and helps avoid localized heavy spots.

Be sure to spray armrests, headrests, and front edges as well as seat cushions. These high-contact areas experience heavy handling and benefit greatly from reinforced protection.

Frequently Asked Questions about Leather Protector

  • What is Leather Protector used for? Leather Protector is used to protect compatible sanded and naturally finished leathers from water-, oil-, and grease-based dirt and stains.

  • Is Leather Protector suitable for nubuck? Yes, Leather Protector is specifically suited for nubuck and other sanded leathers. Always test for colorfastness first.

  • Can Leather Protector be used on suede? Yes, the product is suitable for many suede surfaces. Always perform a preliminary test spot, and do not use if color transfers.

  • Is Leather Protector suitable for pilot leather? Yes, Leather Protector can be used on compatible full-aniline pilot leather.

  • Can the product be used on microleather? Yes, it is suitable for microleather with a microfiber top layer, provided the material proves colorfast and compatible.

  • Does Leather Protector change the color of the leather? When applied correctly, the treatment should not noticeably alter the appearance or texture. Always perform a test spot to verify.

  • How is Leather Protector applied? Shake the spray can for 15 to 20 seconds, hold it upright, and spray in even passes from a distance of 25 centimeters.

  • How long does Leather Protector take to dry? The average drying time is roughly 60 minutes. Full protective curing occurs after approximately 6 to 12 hours.

  • How do I check if the leather is sufficiently protected? Place a few water droplets on a hidden section. The water should bead up. If it absorbs within five seconds, a second thin application is needed.

  • How much surface area can one can cover? A single aerosol can covers approximately 8 to 10 m², based on an application rate of roughly 50 ml per m².

  • What should I do if a white film appears? A white film indicates over-application. Let the material dry completely, then gently brush away the residue with a soft brush.

  • Does Leather Protector need to be re-applied after cleaning? Yes, especially following deep cleaning, re-applying Leather Protector is recommended to restore full protection.

Ordering Leather Protector

Order Leather Protector for invisible protection of nubuck, suede, pilot leather, full-aniline leather, and compatible microleather. The spray prevents water, oil, and grease stains while rendering the surface water-repellent without changing its look or feel. Recommended by Meijer & Visser Upholstery for periodic impregnation of sanded and naturally finished leathers.
View full details

Meubelstoffeerderij

U hoeft niet naar ons toe te komen — wij komen vrijblijvend bij u thuis met een ruime keuze aan stof- en lederstalen. Zo kunt u in uw eigen omgeving rustig de perfecte materialen voor uw meubel kiezen.

VOOR
NA

VOOR & NA

Meubelstoffeerderij Meijer & Visser

Deze gispen fauteuil kwam bij ons binnen met een slechte vulling en versleten stof. De klant koos voor Kvadrat Hallingdal 65 als nieuwe stof en nieuwe lederen zwarte biezen.

Bekijk meer projecten