Natural Wood Protector 2-Component for Furniture and Flooring

Benefits of the Natural Wood Protector 2-Component

• Colorless 2-component hard lacquer
  
  
• Water-based protection formula
  
  
• Strictly for indoor use
  
  
• Suitable for untreated wooden furniture
  
  
• Suitable for wooden flooring and parquet
  
  
• Compatible with oak, teak, mahogany, cherry, and pine
  
  
• Forms an exceptionally strong and wear-resistant shield
  
  
• Virtually invisible finish
  
  
• Preserves the natural wood color as closely as possible
  
  
• Engineered for heavy-use, high-traffic surfaces
  
  
• Dust-dry after approximately 1 hour
  
  
• Recoatable after approximately 4 to 6 hours
  
  
• Lightly loadable after approximately 16 hours
  
  
• Fully cured and heavy-duty loadable after approximately 6 days
  
  
• Coverage rate of approx. 12 to 14 m² per liter per coat
  
  

Product Specifications

• Product: Natural Wood Protector 2-Component
  
  
• EAN Code: 8716834006638
  
  
• Product Number: 520150
  
  
• Surface Type: Untreated wood
  
  
• Maintenance Type: Protect and nourish
  
  
• Product Type: Colorless 2-component hard lacquer
  
  
• Base: Water-based
  
  
• Application: Indoor use only
  
  
• Suitable Substrates: Untreated wooden furniture, parquet, and flooring
  
  
• Suitable Wood Species: Oak, teak, mahogany, cherry, pine, and similar timbers
  
  
• Dust-Dry: Approx. 1 hour
  
  
• Recoatable: Approx. 4 to 6 hours
  
  
• Light Duty Loading: Approx. 16 hours
  
  
• Full Cure / Heavy Duty: Approx. 6 days
  
  
• Coverage: Approx. 12 to 14 m² per liter per coat
  
  
• Required Coats (Furniture): Minimum of two coats
  
  
• Required Coats (Flooring): Minimum of three coats
  
  
• Minimum Application Temp: 10°C
  
  
• Application Tools: Short-haired paint roller or suitable brush
  
  
• Ongoing Maintenance: Nourish with Mat Polish at least twice a year
  
  

What is a 2-Component Wood Protector?

Colorless Water-Based Hard Lacquer

Virtually Invisible Protection

Instructions for Use: Wooden Furniture

1. Confirm that the wood is untreated and clean.
   
   
2. Sand the untreated wood evenly and thoroughly in the direction of the grain.
   
   
3. Remove all sanding dust completely.
   
   
4. Degrease the surface carefully using a suitable wood cleaner.
   
   
5. Allow the wood to dry completely.
   
   
6. Test the product on a hidden area first.
   
   
7. Mix the two components strictly according to package directions.
   
   
8. Apply a thin, uniform first coat.
   
   
9. Avoid puddles and excessive film build-up.
   
   
10. Allow the layer to dry for 4 to 6 hours.
    
    
11. Apply at least a second uniform coat.
    
    
12. Allow the furniture to cure fully before heavy use.
    
    

Instructions for Use: Wooden Flooring

1. Clear the entire floor of all obstacles.
   
   
2. Sand the untreated wood carefully and evenly.
   
   
3. Remove all dust using a powerful vacuum.
   
   
4. Make the surface completely grease-free.
   
   
5. Allow the floor to dry completely.
   
   
6. Test the lacquer on a hidden section first.
   
   
7. Mix the components according to instructions.
   
   
8. Apply the first coat thinly using a short-haired paint roller.
   
   
9. Allow adequate drying time.
   
   
10. Apply a second thin coat.
    
    
11. After the prescribed drying time, apply at least a third coat.
    
    
12. Restrict foot traffic for at least 16 hours (walk only with extreme caution if necessary).
    
    
13. Do not subject the floor to heavy loads or furniture placement until fully cured after 6 days.
    
    

Common Errors to Avoid

• Mixing the two components in an incorrect ratio
  
  
• Preparing more product than can be used within the pot life window
  
  
• Applying the lacquer at temperatures below 10°C
  
  
• Inadequate sanding of the timber
  
  
• Failing to remove all sanding dust
  
  
• Failing to degrease the surface properly
  
  
• Sanding pre-colored or stained wood improperly and stripping away the color layer
  
  
• Skipping a preliminary test spot
  
  
• Applying excessively thick coats
  
  
• Allowing puddles or heavy pooling to form in corners and seams
  
  
• Ignoring recommended drying times between coats
  
  
• Applying only one coat to furniture
  
  
• Applying fewer than three coats to wooden flooring
  
  
• Subjecting the surface to light loads too early
  
  
• Placing heavy items on the surface before complete curing
  
  
• Skipping ongoing maintenance with Mat Polish
  
  

Why does Meijer & Visser Upholstery recommend the Natural Wood Protector 2-Component?

Frequently Asked Questions

• What is a 2-component wood protector? It is a high-performance hard lacquer composed of two parts mixed before use, curing into an exceptionally tough and wear-resistant protective layer.
  
  
• Which wood species are compatible? It works wonderfully on untreated oak, teak, mahogany, cherry, pine, and similar timbers.
  
  
• Can it be used on wooden floors? Yes, it is ideal for indoor wooden flooring and parquet (minimum of three coats required).
  
  
• How many coats are needed for furniture? A minimum of two coats is required for unlacquered wooden furniture.
  
  
• How long does it take to dry? It is dust-dry after about 1 hour and overlakable after 4 to 6 hours.
  
  
• When can the surface be loaded? It handles light traffic/loads after roughly 16 hours and achieves full heavy-duty strength after approximately 6 days.
  
  
• What is the coverage rate? One liter covers approximately 12 to 14 m² per coat.
  
  
• Can it be applied outdoors? No, it is strictly formulated for indoor surfaces.
  
  
• How do I maintain the finish? Nourish and refresh the lacquered surface at least twice a year using Mat Polish.
  
  

Ordering Natural Wood Protector 2-Component