QuickClick Hollow Leg Set (13 mm) with Round Felt Glider (20 mm)

Benefits of the QuickClick 13 mm Set

• Engineered for hollow furniture legs with an inner diameter of approx. 13 mm
  
  
• Includes round 20 mm felt gliders
  
  
• Prevents floor scratches, scuffs, and scraping noises
  
  
• Suitable for parquet, laminate, and stone flooring
  
  
• Accommodates leg angles up to 34 degrees
  
  
• Pack contains 24 sets (sufficient for 6 four-legged chairs)
  
  
• Makes frequently moved dining chairs easier to glide
  
  
• Easily replaceable when the felt wears down over time
  
  

Product Specifications

• Product: QuickClick Hollow Leg Set (13 mm) with Round Felt Glider
  
  
• EAN Code: 8716834008632
  
  
• Product Number: 669905
  
  
• Suitable Leg Type: Hollow furniture legs
  
  
• Inner Leg Diameter: Approx. 13 mm
  
  
• Glider Type: Round felt glider with insert pin
  
  
• Felt Diameter: 20 mm
  
  
• Max Leg Tilt: 34 degrees
  
  
• Quantity per Pack: 24 sets (enough for 6 chairs)
  
  
• Compatible Flooring: Parquet, laminate, and stone
  
  

How to Measure a Hollow Furniture Leg

1. Turn the chair upside down onto a soft, protective surface.
   
   
2. Remove any existing old caps, plugs, or worn gliders.
   
   
3. Clean out any dirt or debris from the inside of the tubular leg.
   
   
4. Measure the inner opening (inner diameter) carefully using a caliper. Do not measure the outer diameter.
   
   
5. Verify that the inner opening measures approximately 13 mm.
   
   

Instructions for Assembly

1. Ensure the inner diameter of the hollow leg is approximately 13 mm.
   
   
2. Clear out all old residues, dirt, or rust from inside the leg tube.
   
   
3. Align the QuickClick insert straight into the opening.
   
   
4. Press the set firmly and evenly into the leg. If necessary, use a rubber mallet gently (never strike the glider directly with a metal hammer).
   
   
5. Set the chair upright and test it on a flat floor to check stability and ensure full contact with the surface.
   
   

Common Errors to Avoid

• Measuring the outer diameter instead of the inner opening of the leg
  
  
• Failing to remove old, worn-out caps before measuring
  
  
• Forcing an incorrect size into the leg
  
  
• Using a metal hammer directly on the glider component
  
  
• Leaving sand or grit trapped inside the felt pads (which can turn the glider into an abrasive pad)
  
  
• Ignoring worn-out felt layers, leading to floor damage once the hard plastic holder makes contact
  
  

Why does Meijer & Visser Upholstery recommend this QuickClick set?

Frequently Asked Questions

• What size leg does this fit? It is designed specifically for hollow furniture legs with an inner opening of approximately 13 mm.
  
  
• How many chairs does one pack cover? One pack includes 24 sets, which is enough for 6 chairs with four legs each.
  
  
• Can it handle angled legs? Yes, it is compatible with leg inclines of up to 34 degrees.
  
  
• Is it safe for laminate and parquet? Yes, the soft felt is ideal for laminate, parquet, and stone floors, provided you keep the felt free of trapped sand.
  
  
• How do I know when to replace them? Replace the felt gliders as soon as the soft felt layer wears down thin or exposes the underlying hard plastic holder.
  
  

Ordering the QuickClick Set (13 mm)