1 1

Furnitureupholstery.nl

Royal Natural Wood Sealer for Untreated and Stained Wood

Royal Natural Wood Sealer for Untreated and Stained Wood

€14,95 EUR
€14,95 EUR
Sale Sold out
Taxes included.
Royal Natural Wood Sealer is a high-quality, colorless, water-based impregnating sealer designed to protect indoor untreated and stained wood. It penetrates deep into wood fibers to form a virtually invisible protective barrier against moisture, oil, grease, and daily dirt without altering the natural look and feel of the timber.

The sealer is engineered for wooden surfaces where the original color, grain structure, and organic aesthetic must be preserved. Unlike traditional heavy clear coats, it leaves no thick plastic film, keeping the wood looking and feeling entirely natural.

Royal Natural Wood Sealer is suitable for tabletops, dining tables, cabinets, sideboards, worktops, wooden flooring, and stair treads. It can be applied to untreated wood, stained wood, solid timber, and compatible veneer.

New or bare wood requires a minimum of two coats for optimal protection. Between coats, the surface can be lightly sanded using fine P240 to P360 grit sandpaper if raised wood fibers occur.

Meijer & Visser Upholstery recommends Royal Natural Wood Sealer for heavily used wooden furniture where a natural, matte, and virtually invisible finish is desired.

Are the upholstery, padding, or fabric of your furniture worn down alongside the wooden frame? Explore the options for having furniture re-upholstered by Meijer & Visser Upholstery.

Benefits of Royal Natural Wood Sealer

  • High-quality colorless wood sealer

  • Suitable for untreated wood

  • Suitable for stained timber

  • Compatible with solid wood and veneer

  • Water-based formulation

  • Virtually odorless

  • Penetrates deep into wood pores

  • Forms a virtually invisible protective layer

  • Helps guard against moisture absorption

  • Protects against oil and grease

  • Guards against everyday dirt and staining

  • Preserves the natural wood color as closely as possible

  • Keeps the natural grain fully visible

  • Designed for high-traffic surfaces

  • Extends the operational lifespan of timber

  • Dust-dry after approximately 30 minutes

  • Sandable after approximately 3 hours

  • Coverage rate of approx. 10 m² per liter

  • Easy to apply using a brush, roller, or cloth

Product Specifications

  • Product: Royal Natural Wood Sealer

  • EAN Code: 8716834010697

  • Product Number: 434011

  • Category: Untreated and stained wood protection

  • Base: Water-based

  • Color: Colorless (Transparent)

  • Application: Indoor use only

  • Suitable Substrates: Untreated wood, stained wood, solid wood, and veneer

  • Not Suitable For: Previously lacquered, oiled, waxed, or damp wood

  • Coverage: Approx. 10 m² per liter per coat (varies by porosity)

  • Dust-Dry: Approx. 30 minutes

  • Sandable: Approx. 3 hours

  • Recommended Coats: Minimum of two coats on bare wood

  • Processing Temperature: Preferably between 15°C and 20°C

  • Application Tools: Brush, roller, or lint-free cloth

  • Ongoing Maintenance: Wood Matt Polish (approx. two to three times a year)

What is Royal Natural Wood Sealer?

Royal Natural Wood Sealer is a deep-penetrating impregnating sealer. Instead of sitting as a thick film on top of the wood, it absorbs directly into the fibers to slow down the absorption of liquids and dirt while letting the true structure of the timber show through.

Protection Without a Heavy Lacquer Film

This sealer is ideal for furniture where a raw, natural look is preferred. It does not yellow or form a heavy artificial gloss, leaving knots, grain patterns, and subtle color variations completely unmasked.

Protection Against Moisture, Oil, and Greases

Bare wood readily absorbs liquids, leading to permanent dark water rings and stains. Royal Natural Wood Sealer delays moisture absorption, though spills should still be wiped up promptly. It also blocks oils and food fats from soaking into tabletops and worktops.

Instructions for Use: Royal Natural Wood Sealer

  1. Verify that the wood is untreated or suitably stained (ensure no old lacquer, oil, or wax remains).

  2. Sand the wood carefully and evenly in the direction of the grain.

  3. Remove all dust thoroughly with a vacuum or cloth.

  4. Clean and degrease the surface if necessary, and let it dry completely. Never apply to damp wood.

  5. Test the sealer on an inconspicuous area first.

  6. Apply the sealer unthinned with a brush, roller, or cloth, working with the grain.

  7. Wipe away excess pooling immediately with a clean cloth.

  8. Allow the first coat to dry for approximately three hours.

  9. Lightly sand raised wood fibers using P240 to P360 grit sandpaper and remove dust.

  10. Apply a second uniform coat.

  11. Allow the surface to cure fully before heavy use.

Common Errors to Avoid

  • Using the sealer over existing lacquer, oil, or wax coatings

  • Applying the product outdoors

  • Applying the sealer onto damp or wet wood

  • Skipping a preliminary test spot

  • Inadequate sanding or failing to remove sanding dust

  • Diluting the water-based sealer with water

  • Applying too much product in a single heavy coat

  • Ignoring the required drying time between coats

  • Applying only one coat to new, bare wood

Why does Meijer & Visser Upholstery recommend Royal Natural Wood Sealer?

Untreated wood possesses an exquisite organic beauty, but it quickly stains and absorbs moisture without protection.

We recommend Royal Natural Wood Sealer because it penetrates deep into the wood to deliver a virtually invisible protective barrier. The natural color and grain remain intact while the furniture gains robust defense against daily life.

Frequently Asked Questions

  • What is Royal Natural Wood Sealer? It is a colorless, water-based impregnating sealer for indoor untreated and stained wood.

  • Can it be used outdoors? No, it is strictly formulated for indoor use.

  • Can it be applied over old oil or wax? No, existing oil, wax, or lacquer must be completely removed because they block penetration.

  • How many coats are needed? New, bare wood requires at least two coats.

  • How long does it take to dry? It is dust-dry after about 30 minutes and sandable after approximately three hours.

  • How do I maintain treated wood? Refresh and care for the surface using Wood Matt Polish approximately two to three times a year.

  • What volume does a liter cover? Coverage is approximately 10 m² per liter per coat.

Ordering Royal Natural Wood Sealer

Order Royal Natural Wood Sealer to invisibly protect indoor untreated and stained wooden surfaces. Meijer & Visser Upholstery recommends this water-based sealer for tabletops, furniture, worktops, floors, and stair treads requiring robust protection without sacrificing natural aesthetics.
View full details

Meubelstoffeerderij

U hoeft niet naar ons toe te komen — wij komen vrijblijvend bij u thuis met een ruime keuze aan stof- en lederstalen. Zo kunt u in uw eigen omgeving rustig de perfecte materialen voor uw meubel kiezen.

VOOR
NA

VOOR & NA

Meubelstoffeerderij Meijer & Visser

Deze gispen fauteuil kwam bij ons binnen met een slechte vulling en versleten stof. De klant koos voor Kvadrat Hallingdal 65 als nieuwe stof en nieuwe lederen zwarte biezen.

Bekijk meer projecten